1. Clean and restore old finishes without destroying the antique patina.   1.1 Dip a pad of 0000 Steel Wool in to Heavy Duty Deep Cleaner. Apply to the surface rubbing in all directions until all dirt and old finish have been dissolved. Important: Do not allow surface to dry. 1.2 Immediately remove the disolved finish by wiping with pad of special Woodworker's Polishing Cotton until surface is clean and dry. 1.3 With a pad of Polishing Cotton wrapped in cotton sheeting, apply a coat of Wood Sealer Base Coat. Allow 2 hours drying time, smooth the surface with 320 GRIT abrasive paper and repeat the process. 1.4 Apply an even coat of Buffing Wax (color to choice) with a soft bristle brush or a pad of 0000 Steel Wool. Allow to dry for 1 hour and buff with soft cloth. 1.5 Maintain your restored antique finish with occasional applications of Sprayshine or Buffing Wax.